The factory default highest sensitivity (the first level). Setting the sensitivity You’ll do the following operations:
1. Press and hold the Disarm key of the remote keep an eye on (Ignore the prompt tone). The remote keep an eye on’s LED turns off for about 3 seconds and lights up again after 3 seonds, then release the Disarm key and press the doorbell key to adjust the sensitivity level.
2. When it is within the highest sensitivity, the alarm will sound a long “Bi……”. Press the doorbell key once, the sensitivety level turns to the next level and the alarm sound a short “Bi……”. When it is within the tenth level, if press one more time, it turns to the first level. The higher the level the less sensitive.
Host 2AAA alkaline batteries to operate ( not included )
An 12V/27A alkaline batteries of the remote keep an eye on to operate
Installation:
Make a choice windows and doors to the installation location, with water and cloth to clean the mounting surface, the double-sided adhesive tape at the bottom and then this machine is connected to the clean position
Application Function:
Arming and disarming
Alarm triggered
Emergency functions
If you end up at home whilst you encounter an intruder or other emergency situations, the remote keep an eye on [flash] is pressed at the key host will ring alarm.
Emergency function keys are valid in any mode.
Doorbell function
Increase the remote keep an eye on and alarm
You’ll increase the remote keep an eye on and alarm depending in your needs see the instruction set
Vibrationally triggered alarm suitable for Doors, Windows, Bikes and Motorcycles
10 level adjustable sensitivity from gently touch to push or beat
Detering thieves effectively by 105dB loud alarm
Arm/Disarm/Panic/Doorbell mode controlled by the remote
Simple peel and stick installation