Wsdcam Door Alarm Wireless Anti-Theft Remote Control Door And Window Security Alarms

The program to pair your alarms and remotes,
Alarm must not in arm mode.
Take out all batteries of the alarm.
The alarm need two batteries.
Pls just put one battery in in the beginning.
While you put the other one into the alarm, pls press and hold the bell button on the remote.
After you hear a “Bi…”, press arm key once.
Then alarm will sound two “Bi… Bi…”. It is well done.

Host 2AAA alkaline batteries to operate ( not included )
An 12V/27A alkaline batteries ( included ) of the remote keep watch over to operate
Installation:
Make a choice windows and doors to the installation location, with water and cloth to clean the mounting surface, the double-sided adhesive tape on the bottom and then this machine is connected to the clean position
Installed host, and then double-sided stickers magnets host next door or door frame, take note of set the magnetic iron arrow at the arrow to the right host.
Ensure close the door the host and the magnet installation distance must not exceed 10mm.
Application Function:
Arming and disarming
Alarm triggered
Emergency functions
If you end up at home While you encounter an intruder or other emergency situations, the remote keep watch over [flash] is pressed on the key host will ring alarm.
Emergency function keys are valid in any mode.
Doorbell function
Increase the remote keep watch over and alarm
You’ll be able to increase the remote keep watch over and alarm depending on your needs see the instruction set

Arm/Disarm/Panic/Doorbell mode controlled by the remote
Magnetically triggered alarm suitable for Doors or Windows
More alarms and remotes to be had for pairing
Detering thieves effectively by 105dB loud alarm
Simple peel and stick installation