W-2000A WattStopper 360 Degree Ultrasonic Motion Ceiling Occupancy Sensor, 24V Watt Stopper

Watt Stopper Ultrasonic Sensors are 24VDC switching devices that automatically switch lighting and HVAC systems off when no motion is sensed over a given time frame. They sense when an area is occupied and turn lights back on again. Watt Stopper ultrasonic occupancy sensors use the doppler shift principle to detect occupancy. Motion in the controlled area causes a slight change in the reflected frequency and amplitude of the broadcast ultrasonic waves. Watt Stopper sensors then Keep watch over lighting systems through Watt Stopper power and auxiliary relay packs. Placement of the sensor is critical for proper operation. Watt Stopper sensors are volumetric sensors and sense motion in a 360 degree pattern. It’s best to place the sensor in order that it has a clear view of the entire desktops or work surfaces within the coverage area. Also, ultrasonic sensors may false-trigger when confronted by high volumes of air float. Sensors will have to be installed no less than four feet from most supply ducts and at least six feet from horizontal discharge ducts. In addition, do not mount sensor within 6″ of power pack. At all times mount the sensor on a rigid, vibration-free surface. When positioning the sensor make sure the receiver is aimed away from nearest wall and toward area to be covered.
360 degree
For lighting and HVAC Keep watch over
Incandescent & Ballasted for 2,000 square foot coverage
Ultrasonic Occupancy Sensor