Potter / Amseco PFC-6800

Description The PFC-6800 is a single loop expandable to eight loop analog/addressable fire alarm keep an eye on panel. The panel utilizes the Potter/Nohmi device protocol that has a complete line of initiating and keep an eye on devices. The SLC is capable of 50 ohms of resistance and does not require using twisted or shielded wire. The on board Signaling Line Circuit (SLC) supports 127 of any combination of smoke sensors, heat detectors or modules. Up to six additional SLC cards could also be added in the keep an eye on panel. Some or the entire SLC cards could also be remotely installed to provide an additional 127 points bringing the total system capacity to 1,016 points. The PFC-6800 has a metal cabinet with a key lock and a dead front standard. The cabinet will house 8 Ah or 18 Ah batteries and the panel has the power to charge up to 55 Ah batteries. The large LCD and window allows easy viewing of the system status and the usual LEDs. The keypad allows easy operation and navigation of the system menu. The panel has auto-programming learn mode so that you can not have an effect on the existing system when adding or deleting a device. The system is capable of 1,500 software zones, cross zoning and counting zones. The panel is fully programmed from a PC based software program so that you can work with Microsoft XP, Vista or Windows 7.0 operating systems. The PFC-6800 has an Ethernet connection for programming network connectivity and IP reporting communicator. The system uses a simple patch cable for connecting a PC to the panel. As well as, the system could also be connected to a building network and programmed whilst on the network. The system has a built in e-mail function and will send system E-mail reminders The IP communicator is listed with the Sur-Gard III IP receiver.
127 points expandable to 1,016 by use of seven SLCE cards
6 NACs regulated, rated at 3 amps every
10 Amp Power Supply
Strobe synchronization for Potter/AMSECO®, Gentex®, Cooper/ Wheelock® and System Sensor®
1,500 Software zones for versatile installation options • 4 x 40 LCD and keypad for ease of operation • Dual P-Link communication circuits for annunciation and accessories • Optional dual line digital alarm communicator reports by panel zone or point ID • Ethernet port for programming, reporting and network connectivity • E-mail system status, reports and event information • Built-in IP communicator supports report by point, zone or panel Electrical Specs AC Mains • 5.0 amps @ 120 VAC 50/60Hz • 3.0 amps @ 240 VAC 50/60Hz Product includes a 5 year warranty Battery • 160 mA Standby • 400 mA Alarm