Ortofon – OM10 Replacement Stylus

Replace your worn out or broken Ortofon stylus with this factory replacement. Excited about an upgrade, but do not need to remount your cartridge? All OM series stylus fit, step as much as the OM-40 for an upgrade or down to the OM-5 for a cheap alternative. TECHNICAL DATA Stylus 5 E Stylus 10 Stylus 20 Stylus 30 Stylus 40 Output voltage 4 mV 4 mV 4 mV 4 mV 4 mV Channel balance 2 dB 1.5 dB 1.5 dB 1 dB 1 dB Channel separation at 1 kHz 22 dB 22 dB 25 dB 25 dB 25 dB Frequency response (Hz) 20-20k 20-20k (+3/-1dB) 20-20k (+2/-1dB) 20-20k (+2/-0dB) 20-20k (+2/-0dB) Stylus type Elliptical Elliptical Nude elliptical Nude Fine Line Nude FG 70 Stylus tip radius r/R 8/18 µm r/R 8/18 µm r/R 8/18 µm r/R 8/40 µm r/R 7/70 µm An identical stylus tip mass 0.5 mg 0.5 mg 0.4 mg 0.3 mg 0.3 mg Tracking force range 1.5-2.0 g 1.25-1.75 g 1.25-1.75 g 1.25-1.75 g 1.25-1.75 g Advisable Tracking force 1.75Gm 1.5Gm 1.5Gm 1.5Gm 1.5Gm Tracking angle 20° 20° 20° 20° 20° Internal impedance 750 Ohm 1 kOhm 1 kOhm 1 kOhm 1 kOhm Internal inductance 450 mH 580 mH 580 mH 580 mH 580 mH Advisable resistance 47 kOhm 47 kOhm 47 kOhm 47 kOhm 47 kOhm Advisable capacitance 2 hundred-six hundred pF 2 hundred-400 pF 2 hundred-400 pF 2 hundred-400 pF 2 hundred-400 pF Cartridge weight 5 g 5 g 5 g 5 g 5 g
Output voltage: 4 mV
Channel balance: 1.5 dB
Stylus type: Elliptical
An identical stylus tip mass: 0.5 mg
Tracking force range: 1.25-1.75 g