NooElec NESDR SMArTee XTR Bundle – Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & E4000-Based Software Defined Radio

This premium RTL-SDR was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests.

The integrated, highly-regulated 3.3v bias-tee is ready to power your RF accessories–no hardware or software modifications are required to activate the bias-tee. The bias-tee is protected by an automatically resetting fuse, to ensure your investment is safe from accidental short-circuits of the RF input.

Compared to R820T-based devices, this E4000-based SDR excels at sensitivity at 1500MHz, and is capable of far higher frequencies–up to approximately 2350MHz. There is a small gap in frequency capability near 1100MHz. As such, we do NOT recommend this device for ADS-B usage. For ADS-B, consider NESDR SMArt, also available on Amazon.

For full product specifications, please visit our website at nooelec.com

Included:

✔ NESDR SMArTee XTR SDR in silver brushed aluminum enclosure
✔ Antenna base w/ 2m RG58 cable
✔ Telescopic antenna mast (variable frequency capability)
✔ 433MHz (ISM) antenna mast (10.5″, fixed frequency)
✔ UHF antenna mast (4.5″, fixed frequency)

SDR Specifications:

✔ RTL2832U Demodulator/USB interface IC and E4000 tuner IC
✔ Integrated, always-on bias-tee (3.3V, 100mA max)
✔ 0.5PPM, ultra-low phase noise TCXO
✔ 2 RF-suitable voltage regulators
✔ Shielded primary inductor
✔ Integrated custom heatsink
✔ 2 silicone pads
✔ Female SMA antenna input
✔ High-quality silver brushed aluminum enclosure
✔ Frequency capability approximately 65MHz-2300MHz, with small frequency gap near 1100MHz
Premium RTL-SDR bundle includes NESDR SMArTee XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5′) RG-58 feed cable, and 3 antenna masts
A wide variety of improvements on other designs, including integrated bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector
Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
Proudly built by NooElec in the USA and Canada! Full 2-year product warranty