Meikon 40m Underwater Waterproof Housing Case for Fujifilm Fuji X-A2 Camera

This underwater housing can keep your digital camera protected and dry when take photos underwater. You’ll take all exciting and perfect moments photos and show it to other people via the underwater camera cover.

The waterproof cases don’t seem to be only for divers, with these housings , you no longer have to worry about your camera if it is raining, snowy or dusty.

Pls use the case as per the button which is available on it and accordingly to the Manual.

Attention before use:

Check whether good of performance first. Also check whether have sand and dust inside of case.

Will have to close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.

Make sure there have no water inside. Then put your camera into waterproof case.

Precautionary Measure:

Use numerous fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C water may not use, because it’ll damage waterproof shell.
Need longer cleaning time if ever used waterproof case. Will have to put into water for several hours.
Please sure whole case into water, include Safety lock device.
In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water.
Vestigital seawater will lead to corrosion metal parts equipment, it’ll impact button, two hinges and safety lock device
Use soft and clean fabric to clean equipment inside.

Package Includes:

1 x waterproof case for Fujifilm Fuji X-A2 Camera
1 x Cloth
1 x Neck strip
1 x Hand strip
1 x O-ring
1 x Water sealing lubricant grease
1 x English manual
1 x Original package
Whether rain or snow, You’ll have unrestricted use of your camera,Good tightness, high mechanical strength, to give protection to your camera
Dustproof, anti-staining fingerprint, easy cleaning.Transparent hard plastic material and waterproof, Clear view the camera information and keep watch over function
“O” ring sealed with spring-loaded.1/4″tripod screw on the bottom
Material: Polycarbonate,Abs plastic,clear plate glass,Stainless steel,EPDM rubber.With this special design case,every key of inside can be pressed to keep watch over freely as you wish to have
Before close the case,please coat around the joint with the lubricant grease to get the good sealing effect.Temperature: -10~40°C.Water resistant up to 40meters (130fts waterproof/Shockproof).Fit for: Fujifilm Fuji X-A2 Camera