Authentic Apple MacBook Pro Rubber Feet Replacement Kit Bottom Case 13″ 15″ 17″ A1278 A1286 A1297 (MacBook Pro, Black)

Email us to get this item for FREE [email protected] For RETINA MODELS USE LINK BELOW
https://www.amazon.ca/dp/B01BKNMFJ4

MAKE SURE YOU BUY ONLY FROM INFINITE PRODUCTS® WE DO NOT HAVE OTHER AUTHORIZED SELLERS NOT FOR RETINA DISPLAY MACBOOKS

For RETINA MODELS USE LINK BELOW https://www.amazon.ca/dp/B01BKNMFJ4 How to Replace
1. Remove the bottom case and peel adhesive remains up
2. Attached the feet to the base case with super glue. Then put the inner feet on the super glue and Press for a few of seconds
3. Instructions https://support.apple.com/en-us/HT202450

Note
1. Screws at sides and front must be removed and installed at an angle.start with a good condition screwdriver (screwdriver blades & tip are not worn or bent) is necessary. Place the screwdriver tip into the screw like normal. Making sure the blades & tip of the screwdriver fit into the head slots in the screw as best as possible (considering that the slots in the screw are messed up).use something like a small hammer (or other heavy object)…and as firmly as you dare…tap on top of the screwdriver (do not allow the screwdriver to move while tapping it).
2. The adhesive on the Rubber Feet are not strong enough to stick the feet. Glue is required to properly install Rubber Feet as suggested by Apple.Supper glue contains ethyl cyanoacrylate. Avoid contact with skin and eyes.
3. Feet Set is a little harder and thinner than the original one.

Include

4 × Outer Foot(Rubber)
4 × Inner Plug(Plastic)
3 × 13.5 mm Phillips screws
7 × 3 mm Phillips screws
1 × Super Glue
1 × Philips #00 Screw Driver(non-magnetic)

Compatible Model No
MB466LL/A, MB467LL/A, MB467LL/A, MB991LL/A, MC374LL/A, MC375LL/A, MC700LL/A, MD313LL/A, MC724LL/A, MD314LL/A, MD101LL/A, MD102LL/A, MB470LL/A, MB471LL/A, MC118LL/A, MC026LL/A, MB985LL/A, MB986LL/A, MC371LL/A, MC372LL/A, MC373LL/A, MC721LL/A, MC723LL/A
NOT FOR RETINA DISPLAY MACBOOK PROS. ONLY FOR MACBOOK PRO 2008 – 2011 PLEASE READ DESCRIPTION.
Macbook pro rubber feet replacement pad set include outer feet and inner plugs, included super glue.Sprayed with Anti-slip Rubber, for Anti-slidding. The 3M adhesive is used as a placement guide but will require glue to stay in place. Macbook pro foot out feet is made of rubber and plastic mix which is the closest to replacement to the original, Inner plugs are full plastic.
MBP 13″ MBP 15″ MBP 17″ Original MacBook Pro screws set have a rubber cement base for locking in the new screws after opening the bottom case. There are three long philips head screws and 7 philips head small screws.
There are 3 types of macbook rubber feet, check serial Numbers at the bottom case before order. This kind of bottom case screw and rubber feet are fit for macbook PRO macbook pro 13 MBP 15 MBP 17 A1278 A1286 A1297 ONLY, not for MBP AIR ONES( A1370 A1369 A1465 A1466) and NOT for MBP RETINA models (a1425 a1502 a1398)
Included: Macbook pro Rubber feet Outer foot set of 4, and inner plug set of 4, Macbook pro bottom case screw 1 set, and superglue one piece, screwdriver × 1.