Warning:
1.Do not wipe the glue.use the cotton dry swab to absorb any excess glue. Fumes from other types of glue could affect other internal components.Excess puddled glue may take hours to dry and may cause the bottom case to adhere to the logic board or interior cabling.
2.Screws at sides and front must be removed and installed at an angle.
3.Install screws in order shown. If sequence is not followed, bottom case might wobble when placed on level surface.
SAFETY INSTRUCTIONS-GLUE IS AN EYE AND SKIN IRRITANT.
GLUE BONDS TO SKIN INSTANTLY.
Contains ethyl cyanoacrylate. Avoid contact with skin and eyes. If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and GET MEDICAL ATTENTION. Liquid glue will sting eye temporarily. Solidified glue may irritate eye like a grain of sand and should be treated by an eye doctor.
If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. use with adequate ventilation. KEEP OUT OF THE REACH OF CHILDREN.
General information
1.A MacBook Pro covered by the Apple Limited Warranty or by an AppleCare Protection Plan may receive a replacement foot without charge.
2.A MacBook Pro that is out-of-warranty may have a charge associated with the replacement.
3.The DIY replacement kit not available for MacBook Pro OR Pro with Retina display computers.
4.How to replace
https://support.apple.com/en-us/HT202450
For MBA 13.3 inch 11.6 inch MBA Macbook air rubber feet pad set include 4pcs out feet , super glue and screwdriver. Anti-slip Rubber feet is used for supporting the whole MBA, with 3m self adhesive sticker. The adhesive pasted on macbook air rubber feet, is one kind of two sided sticky tape that comes off easily, super glue is necessary to stick them tightly. Macbook air foot-out feet is made of rubber,but the out feet is a little harder than original.
There are 3 types of macbook rubber feet, check serious No. at the bottom case before order. This kind of rubber feet are fit for AIR ONES( A1370 A1369 A1465 A1466 ) ONLY ,not for macbook PRO mac 13 mac 15 mac 17 A1278 A1286 A1297 PRO RETINA ONES(A1425 A1502 A1398)
Includ: Macbook Air feet × 4, glue × 1, screwdriver × 1
Material: Rubber&Plastic (a little harder than original one)
Convenience Packaging with tools, Easy replacement with Instruction