This underwater camera covers can keep your digital camera protected and dry, let your take photos in places you wouldnot in a different way take your camera even underwater. You’ll be able to take all exciting and perfect moments photos and show it to other people via the underwater camera covers
This underwater camera covers don’t seem to be only for divers, with these housings , you no longer have to worry about your camera if it is raining, snowy or dusty. The underwater camera covers are transparent and allow the botton and switches to be operated easily
Before close the case,please coat around the joint with the lubricant grease to get the good sealing effect.Pls use the case as per the button which is available on it and accordingly to the Manual.
Attention before use:
Check whether good of performance first. Also check whether have sand and dust inside of case.
Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Make sure there have no water inside. Then put your camera into waterproof case.
Precautionary Measure:
use numerous fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40° Cwater may not use, because it’s going to damage waterproof shell.
Need longer cleaning time if ever used waterproof case. Should put into water for several hours.
Please sure whole case into water, include Safety lock devic.
In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water.
Vestigital seawater will lead to corrosion metal parts equipment, it’s going to impact button, two hinges and safety lock device Use soft and clean fabric to clean equipment inside.
Good tightness, high mechanical strength, to offer protection to your camera.Dustproof, anti-staining fingerprint, easy cleaning.Water resistant up to 40meters (130fts waterproof/Shockproof)
Transparent hard plastic material and waterproof, Clear view the camera information and keep watch over function
“O” ring sealed with spring-loaded.1/4″tripod screw on the bottom Material: Polycarbonate,Abs plastic,clear plate glass,Stainless steel,EPDM rubber
With this special design case,every key of inside can be pressed to keep watch over freely as you need. Temperature: -10~40°C. Fit for: Sony A5000 16-50mm Lens
Package includes:1x Sony A5000 Case 1x Neck Strip 1x Wrist Rope1x O-ring Gasket 1x Use Manual 1x Waterproof Oil