Cool-See Replacement For Macbook Pro Unibody A1278 / A1286 / A1297 Pack Rubber Feet 4pcs/set + Bottom Case Repair Replacement Screws 10pcs/set + Keyboard Screws 100pcs/set

New Bottom Case Rubber Feet Foot for A1278 / A1286 / A1297 Macbook Pro Unibody 4pcs/set + Bottom Case Repair Replacement Screws 10pcs/set + Keyboard Screws 100pcs/set
How to Replace
1. Remove the bottom case and peel adhesive remains up
2. Attached the feet to the base case with supper glue. and Press for a few of seconds
3. Instructions https://support.apple.com/en-us/HT202450
Note
1. Screws at sides and front must be removed and installed at an angle.start with a good condition screwdriver (screwdriver blades & tip are not worn or bent) is nessary. Place the screwdriver tip into the screw like normal. Making sure the blades & tip of the screwdriver fit into the head slots in the screw as best as possible (considering that the slots in the screw are messed up).use something like a small hammer (or other heavy object)…and as firmly as you dare…tap on top of the screwdriver (do not allow the screwdriver to move while tapping it).
2. The adhesive on the Rubber Feet are not strong enough to stick the feet. Glue is required to properly install Rubber Feet as suggested by Apple.Supper glue contains ethyl cyanoacrylate. Avoid contact with skin and eyes.
3. Feet Set is a little harder and thinner than the original one.
100% replacement and high quality
Item include: 4pcs Rubber Feet + 10pcs Bottom Case Screws + 100pcs Keyboard Screws
Compatibility: MacBook Pro 13″ Unibody A1278 (Mid 2009, Mid 2010, Early 2011, Late 2011, Mid 2012)
Compatibility: MacBook Pro 15″ Unibody A1286 (Mid 2009, Mid 2010, Early 2011, Late 2011, Mid 2012)
Compatibility: MacBook Pro 17″ Unibody A1297 (Mid 2009, Mid 2010, Early 2011, Late 2011, Mid 2012)