Tenergy 3.7V Arlo Battery Fast Charger and 650mAh RCR123A Li-ion Rechargeable Batteries for Arlo Wireless Security Cameras (VMC3030/VMK3200/VMS3330/3430/3530),UL UN Certified, 8-Pack

Charger&Battery For Arlo Security Camera
Lithium-ion rechargeable batteries and specifically designed to work with Arlo Security Cameras. Works with Arlo Wire-Free HD Security Cameras (VMC3030)

Certified for Safety and Power Efficiency
Battery: Extensively tested and certified by the most stringent battery safety standard: UL 1642, UL 2054, UN 38.3, IEC 62133, UL 60950, Battery Directive (2006/66/EC), CSTCG (PI965).
Charger: Certified for international CE and FCC safety standards. It has also been certified to California’s CEC standard to verify power efficiency. Charger Adapter with UL certification.

Technical Specifications:
Charger:
Compatible with Tenergy 3.7V 650mAh RCR123A Li-ion Rechargeable Battery only. Do not charge any other type of battery.
Input: 100-240V AC 50/60Hz
Output: 4.2V DC, 400mA x 4 (1600mA Max)
Dimensions: 3.6 x 3.1 x 1 inch

Battery:
Battery Size: RCR123A (16340)
Battery Type: Li-ion Rechargeable
Voltage: 3.7V
Capacity: 650mAh
Charge up to 500 times
Dimensions: 16.9mm (diameter) x 34.3mm (length)
UL and UN Certified

IMPORTANT
– This Tenergy Li-ion rechargeable RCR23A battery is intended to be used in Arlo security camera ONLY. Do not use the batteries in any flashlights or any device that require high power/high current drain.
– Do not mix&use these rechargeable RCR23A battery with any one-time use Lithium CR123A batteries (for example Panasonic or Duracell Lithium CR123A).
– Do not mix&use this Tenergy rechargeable RCR23A battery with any other rechargeable RCR123A batteries.
– Do not charge any one-time use Lithium CR123A batteries. Charging these Lithium CR123A could cause explosion or fire.
– Charge only Tenergy Li-ion 3.7V 650mAh RCR123A batteries. Other rechargeable RCR123A batteries do not work with this charger.
– Mis-use either the charger or the batteries could cause explosion or fire.
CHARGER AND BATTERY FOR ARLO SECURITY CAMERAS – Lithium-ion rechargeable RCR123A battery and charger specifically designed to work with Arlo Security Cameras seamlessly. Works with Arlo Wire-Free HD Security Cameras (VMC3030/3200/3330/3430/3530) **DO NOT USE NON-RECHARGEABLE BATTERIES WITH THE CHARGER–usage with non-rechargeable battery can lead to imaginable fire or charger failure.
SOPHISTICATED CHARGING SAFETY – The RCR123A Lithium-ion Battery Charger for Arlo camera has built-in protection against reverse-polarity and short-circuit for charging safety. Built with temperature sensors that prevents charging induced over-heating. The charger body is made of fire retardant materials. Also features safety timer with the intention to automatically shut off the charger in 3 hours to prevent over-charge and to come up with peace of mind.
QUICK CHARGE – With a charging current of 400mA, your Tenergy 3.7V RCR123A Batteries for Arlo will also be fully charged in about 2-3 hours. It is incredibly convenient and makes an ideal Arlo camera battery and charger solution.
SMART PROTECTION – Built-in protection circuit actively manages battery performance all through charging and discharging. Helps detect and prevent over-charge, over-discharge, short-circuit, or over-current by shutting off the device or charger.
REUSE & SAVE – The usage of Lithium-ion based RCR123A batteries and charger offers significant reusability over non-rechargeable. This battery will also be recharged up to 500 times. Best used as an immediate replacement for CR123A batteries for batter savings and prolonged usage. Limit the carbon footprint left at the back of from wasteful non-rechargeable Lithium CR123A batteries and replace them with rechargeable ones.