AntMiner Power Supply (APW5 Quiet 1300W@110v 2600W@220v w/ 20 Connectors)

The APW5 is Bitmain’s most advanced PSU to date and is compatible with both the 220V power supply and the 110V power supply that is the standard in North America. It combines high efficiency and good dynamic performance into a power dense package. It also features overload, overheat, overcurrent and low voltage protection, making it well suited to 12V, ≤ 2600W* power devices (with 220v input).

APW5 Specifications:

DC Output Voltage: 12.25V
Rated Current (220V input): 216A
Rated Power (220V input): 2600W
Rated Current (110V input): 108A
Rated Power (110V input): 1300W
Ripple & Noise: <1%
Voltage Regulation: <2%
Source Regulation: <1%
Load Regulation: <1%
Setup, Rise Time: <5S
Power off Protection Trip Time: >10mS
Interface Type: 10pairs of 6pin PCI-E connectors. 380mm length for each PCI-E cable.
Input Voltage Range: 90-265V AC
Input Current Range: 10.5-16.5A
Input Starting Voltage: 100-240V AC
Input Frequency Range: 47-63Hz
Power Factor: >0.95(full load)
Leakage Current: <1.5mA (220V 50Hz)
Low-voltage Input Protection: 90-100V AC
Output Short Circuit: Yes
Output Overcurrent (220V input): 216-255A
Output Overcurrent (110V input): 108-135A
Overheat Protection: Yes
Operating Temperature: -20 – +60℃
Operating Humidity: 20%-90% RH (non-condensing)
Dimensions: 266mm*125mm*86mm
Weight: 2.5Kg
Cooling: Forced-air fan cooling
Fan speed: When the temperature of the heat sink is higher than 80 ℃, the fan runs at full speed.

Designed for the AntMiner L3+, S9, D3, T9, & R4
Outputs 1300W – 2600W depending on 110v or 220v input voltage.
Run multiple Antminers on 240v
Has 10 pairs of 6-pin PCI-e connectors (20 total connectors)
Power cable not included. Uses standard PC power port (IEC-320-C13)