CHAOWEI DTV530 4.3″ PORTABLE TELEVISION operates on an included Li-ion battery pack and will have to be charged prior to make use of.
Contents:
- Chaowei DTV530AM TV
- Power Adaptor(5V/1.5A)
- Li-ion Rechargeable Battery Pack(3.7V/2000mAh)
- External Antenna
- Headphone 3.5mm Jack
- Protective Pouch
- MCX connector
- DC 1.35*3.5MM to USB adapter
- Instruction Manual with limited 1 year warranty
Quick Start Guide: (PLS CHARGE THE TV FOR AT LEAST 6 HOURS BEFORE FIRST USE)
1,Turning at the TV
1)Switch to the”ON”position; 2)Flip out the stand; 3)Press the POWER button if it does not activate in 6 seconds.
2,Setup
1)Fully extend the internal telescopic antenna Or Attach the included magnetic base antenna ; 2)Unwrap and fully extend the cord.
3,Auto scan for channels: press OK to begin the AUTO SCAN.
4,Watching a program: 1)Press the VOL-/VOL+ buttons to adjust the volume; 2)Press CH-/CH+ buttons to modify the channels.
5, Attaching the Earbuds: insert the plug from the earbuds into the jack at the side of the TV
Pocket TV Specification:
RF Reception: Terrestrial ATSC 8VSB: 54-860MHz(CH2-69)
Antennas: Built-in Antenna: telescopic,monopole type;External Antenna: monopole type with 40″extension cord & MCX connector
Audio Processing: Digital Multi-lingual
Audio Output: Built-in Speakerx1 and 3.5mm Headphone Jack
Video Processing: MPEG-2 Video Decoding,Terrestrial NTSC
Resolution: 480Hx272V
Operating Temperature: 14°F-122°F(-10°C-50°C)
Weight: 7oz(200g)
4.3in TFT LCD Screen:Wide (16:9)/Normal (4:3) Selectable Screen Model,works for no less than 2.5hours if full charged
Full ATSC Digital Broadcast Receiver,Reception Frequencies:57 MHz – 803MHz (Air Channel)
Digital Volume Keep an eye on,Auto Channel Programming,Low Battery Indicator,Closed Captioning
Powered by AC/DC adaptor(included) or Built-in Rechargeable Li-ion Battery;DC to USB adapter to your power bank with 5V output
Including Telescopic/External Magnetic Base Antenna,Stereo Earbuds,Built-in Speaker,Carrying Pouch,MCX connector for other High Gain Antenna to spice up signal